- Ergonomic design for comfort
- Compact and lightweight build
- 2 x BL1850 5.0Ah Battery
- 1 x DC18RC Charger
Makita 18V 6 Piece Combo Kit with 2 x 5.0Ah Batteries & MAKTRAK Trolley Toolbox
Kit Content:
Makita DHP484Z Brushless Combi Drill
Makita DTD172Z Brushless Impact Driver
Makita DGA452Z Angle Grinder
Makita DHR202Z SDS+ Rotary Hammer Drill
Makita DTM50Z Multi Tool
Makita DHS680Z Brushless Circular Saw
2 x BL1850 5.0Ah Battery
1 x DC18RC Charger
1 x P-91001 MAKTRAK Rolling Tool Chest
Features:
Makita DHP484Z Brushless Combi Drill:
Brushless motor
Electric brake
2 mechanical gears
Variable speed control by trigger
Forward/reverse rotation
LED job light
Compact Overall Length of 182mm
Keyless Chuck
Aluminium Gear Housing
All metal gear construction
Ergonomic soft grip
Belt clip
Makita DTD172Z Brushless Impact Driver:
Electric brake
Variable speed control by trigger
Reverse switch
Quick mode switching button
LED job light with pre-glow and after glow function
Slim tool body
Anti bit-wobbling structure
Compact tool body with a shorter overall length of 114mm
New one-touch bit installation
Electronic 4 stage impact power selection
Ergonomically designed handle
Makita DGA452Z Angle Grinder:
Electric brake
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Anti-restart function minimises accidental start-up
Forward and reverse trigger
LED job light
Ergonomic soft grip
Makita DHR202Z SDS+ Rotary Hammer Drill:
3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
Chisel rotates 360 with 40 different positions to get the best working
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light
Rotary hammer action
Rotary only action
Variable speed trigger
Makita DTM50Z Multi Tool:
Thumb On/Off switch, positioned for ease of use when holding body of machine.
Hex wrench holder on body.
Variable speed control dial.
Dust extraction attachment.
Accessories can be installed at 30 increments, across 360.
Uses OIS interface.
Makita DHS680Z Brushless Circular Saw:
Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation.
High Efficiency Brushless motor provides higher power and more work amount.
Electric brake.
Soft start.
Electronic current limiter for overload protection.
Tool Hanger.
Twin LED job light.
Battery fuel gauge.
Rear dust exhaust port.
Large lock off lever.
Compact and lightweight design.
Ergonomic soft grip.
Blower function to clear wood dust from cutting line.
Larger base than current models for more stable operation.
Comes With:
2 x BL1850 5.0Ah Battery
1 x DC18RC Charger
1 x P-91001 MAKTRAK Rolling Tool Chest
Product Specification:
Makita DHP484Z Brushless Combi Drill:
Part Number: DHP484Z
Nominal Battery Voltage: 18 V
Voltage LXT: Yes
Brushless Motor: Yes
No load speed: 0 – 500 / 2000 min
Max. fastening torque Hard/Soft: 54 / 30 Nm
Torque setting: 21
Impacts per Minute (IPM): 0 – 7500 / 30000 min
Max. Drilling Diameter in Wood: 38 mm
Max. Drilling Diameter in Masonry: 13 mm
Max. Drilling Diameter in Concrete: 13 mm
Max. Drilling Diameter in Steel: 13 mm
Driving Shank: 1/2″-20UNF “
Drill Chuck Capacity: 1,5 – 13 mm
Sound Power Level (LWA): 99 dB(A)
Sound Pressure Level (LpA): 88 dB(A)
Noise Uncertainty (K Factor): 3 dB(A)
Vibration Level, Drilling into metal: 2,5 m/s
Vibration Level, Impact Drilling into Concrete: 8,0 m/s
Vibration Uncertainty (K Factor), Drilling into metal: 1,5 m/s
Vibration Uncertainty (K Factor), Impact Drilling into Concrete: 1,5 m/s
Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion
Drilling Capacity Wood (Auger Bit): 38 mm
Drilling Capacity Wood (Self-feed bit): 76 mm
Electronic brake: Yes
Makita DTD172Z Brushless Impact Driver:
Part Number: DTD172Z
Electric Brake: Yes
Joblight: Yes
Reverse switch: Yes
Variable Speed Control: Yes
Voltage: 18V
Standard Bolt: M5 – M16
High Tensile Bolt: M5 – M14
Coarse thread (length): 22 – 125 mm
Max Fastening Torque: 180 Nm
Blows per Minute (Max) – ipm: 0 – 3,800 ipm
Vibration K factor: 1.5 m/sec
Noise sound pressure: 97 dB(A)
Noise sound power: 108 dB(A)
Noise K factor: 3 dB(A)
Driving Shank: 6.35mm 1/4″ Hex
Blows per Minute (Med) – ipm: 0 – 2,600 ipm
Makita DGA452Z Angle Grinder:
Part Number: DGA452Z
Grinding Wheel: 4-1/2″ / 115mm
Max Wheel Diameter: 4-1/2″ 115mm
No Load RPM: 10,000
Watt Hours: 54.0
Overall Length: 12-1/2″
Makita DHR202Z SDS+ Rotary Hammer Drill:
Part Number: DHR202Z
Voltage: 18V
Shank Type: SDS+ Plus
Capacity in Concrete: 20mm
Capacity in Steel: 13mm
Capacity in Wood: 26mm
Impacts per Minute: 0-4,000 ipm
Impact Energy: 2.0 J
No Load Speed: 0-1,100 rpm
Overall Length: 358 mm
NOISE & VIBRATION:
Vibration: Drilling: 3 m/sec
Vibration: Chiselling: 11 m/sec
Vibration: Hammsure: 87 dB(A)
Noise Sound Power: 98 dB(A)
Noise K Factor: 3er Drilling: 145 m/sec
Vibration K Factor: 15 m/sec
Noise Sound Pres dB(A)
Makita DTM50Z Multi Tool:
Part Number: DTM50Z
Battery Type: Lithium-ion
Voltage: 18V
Oscillation Angle: 3.2
Oscillations per Minute: 6000 – 20000
Vibration K factor: 1.5 m/sec
Vibration: Cutting Metal: 5 m/sec
Vibration: Cutting Wood: 9.5 m/sec
Vibration: Chiselling: 7.5 m/sec
Vibration: Sanding: 2.5 m/sec
Makita DHS680Z Brushless Circular Saw:
Part Number: DHS680Z
Nominal Battery Voltage: 18 V
Max. Cutting Depth at 90: 57 mm
Max. Cutting Depth at 45: 41 mm
Max. Cutting Depth at 50: 37 mm
Max. Bevel Range (Left): 0 / 50
No load speed: 5000 min
Sound Power Level (LWA): 105 dB(A)
Sound Pressure Level (LpA): 94 dB(A)
Noise Uncertainty (K Factor): 3 dB(A)
Vibration Level (3 axes): 2,5 m/s
Vibration Uncertainty (K Factor): 1,5 m/s
Battery Chemistry (Ni-Cd / Ni-MH / Li-ion): Li-ion
Max Output Power: 680 W
Capacity 45: 41 mm
Blade Diameter: 165 mm
Bore Size (Arbor Diameter): 20 mm
Vacuum cleaner connection in / out: 35/40 mm
**images for illustrative purposes only please refer to description and specification for full details of product**
Reviews
There are no reviews yet.